1 / 3
Airbox Adapter for Mikuni Carbs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 1/4" air intake to a 2" reducer. Fits Mikuni VM34 (and maybe other models)
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 79
- Makes
- 0
- Views
- 1,109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My Mikuni VM34 (may fit other models) had a 2 1/4" air intake. Had a 2" filter on-hand and that size seems to be much easier to find.
Was hard to find a solution that was long enough to both clear my battery box and side cover. Can confirm it fits and works great with the Mikuni carb. I assume this could also work for other 70s Honda with a similar body style.
Print:
Used Prusament ASA at .15mm and 15% infill. 2 perimeters, but should have probably done more.
Install:
- Obviously be light on torque with a hose clamp. Just enough to create some friction. The print has a small lip to help with extra stability with ribbed hoses.
- Used black liquid (silicon) gasket for connection with carb
- A few dabs of high-temp gel glue at the connection with the carb