Tesla 5-way valve tool (diverter valve wrench)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tool you need to rotate the 5-way valve on your Tesla Model 3 or Model Y after a replacement
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 539
- Wydruki
- 2
- Wyświetlenia
- 2415
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
If you go in service mode and your Tesla says VCFRONT a210 coolant Valve Calib, you will need this tool to rotate the 5-way valve so it meshes with the actuator. You will also need their software called Toolbox and either a special cable if you have a pre-2019 to do the calibration or a simple RJ45 cable if you have a newer Tesla
In the service manual they call this tool the diverter valve wrench
I used 3 walls and 30% gyroid infill. This was plenty strong
Please note there is a filet on one side for easier insertion, and the line shows where the wider side is