1 / 3
Tesla 5-way valve tool (diverter valve wrench) — image 1
1 / 3

Tesla 5-way valve tool (diverter valve wrench)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The tool you need to rotate the 5-way valve on your Tesla Model 3 or Model Y after a replacement

Rating
5 / 5
Likes
13
Downloads
539
Makes
2
Views
2,415
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

If you go in service mode and your Tesla says VCFRONT a210 coolant Valve Calib, you will need this tool to rotate the 5-way valve so it meshes with the actuator. You will also need their software called Toolbox and either a special cable if you have a pre-2019 to do the calibration or a simple RJ45 cable if you have a newer Tesla 

 

In the service manual they call this tool the diverter valve wrench

 

I used 3 walls and 30% gyroid infill. This was plenty strong

 

Please note there is a filet on one side for easier insertion, and the line shows where the wider side is

 

Tags