Counting matching models…
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…
This 20 x 20 x 20 mm calibration cube will help you with printer tuning. I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print. Printing Recommendations: 0.2 mm layer hight, no…
All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buymeacoffee . This cube printer about 10% shorter than classic And look much better than clasic calibration cube
Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.
A 1x1 inch Calibration Cube to test your printer
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
More information in this article .
This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…
test the quality of your prints by printing a cali dog
I made yet another temperature tower because I couldn't gauge how smaller details were affected with other temperature towers on Thingiverse. Printed in PLA, it only uses about 4 grams of filament. Each section is 10mm tall 4/4/21 Update:…
Calibration + Test Cube 20 Kalibration + Testwürfel 20
It always bothered me how a calibration cube is the standard for stepper motor calibrations — it takes long time to print, uses bunch of filament, and doesn't even calibrate your printer well. Calibration will be more accurate the bigger…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .40 Caliber rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
This is a gCode file that you can use in your Laser Engraver to test the effect of speed vs power. It will produce a Greyscale burn pattern that is 140 mm / 107 mm. You can use this test pattern to get an idea of how your engraver will…
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
25*25*25mm calibration cube for XYZ axes
What is it ? This is just the model from yahbluez scaled down and copied 4 times in the corners of the plate. It allows to find the z-offset for 5 different parts of the plate, allowing you to check your bed levelling, bed flatness and if…
CLICK HERE If you're looking for 12ga storage trays for a standard M19A1 .30 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
This is my simple calibration 20mm cube for XYZ axis. Letters are written on sides. If you like this cube, you can give me a like or rate this model 👍 Thank you! Good luck with your calibration!
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
I, personally, use the first layer calibration a lot, and I am guessing most of you do as well. However, I also wanted something that could calibrate the 2nd layer as well. So, I remixed Herbert's “bed level correction for Prusa mini”, so…
This is a simple 20mm XYZ Calibration cube. I also added a 3DBenchy-style first-layer-squashing test on the bottom of the print. Hope you enjoy using the model! The cube on the photos was printed with 3DJake ecoPLA Brown. You can find the…
Calibration Cube - Furniture knob Simply print one of the two variants (with printed M4 thread or for threaded inserts). Suitable M4 screws are required, the length of which depends on the thickness of the furniture fronts. The print file…
SUPER PINDA 1.5mm adjustment tool 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Only 10 minutes to print. No support needed. Keep in mind : Always recalibrate the Z-live after a Super…
Calibrate your printer before printing large parts! For this, we designed this calibration block that should weigh at least 5.4g, when printed. We recommend printing it and weighing it before you start creating large, heavy and expansive…
I made the whole test smaller and faster to print. Will save you time if you are used to original model. Print Files for printers: MK3 / MK3S /MK3S+ / MINI / MINI+ Print Files for filaments: PETG / PLA / ASA / PVB All instructions how to…
Hello, Today I have a 20x20 Calibration Cube for you. It is suitable for setting the ideal size of your print. I succeeded :-)!!! I used PLA/PETG as the material. No need to use supports If you are interested in my work, the links are…
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
print resolution: doesnt matter material: doesnt matter Don't forget add photo
I designed this calibrated espresso tamper to deliver precisely 30lbs of pressure when the handle cap is completely compressed along the hexagonal running shaft of the base, though the pressure you achieve will vary depending on which…
SUPER PINDA 1.5mm adjustment with 3030 MOUNT 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Hold it on the 3030 extruded frame or enclosure with its mount included. Only 20 minutes to…
Hello, Today I have for you Calibration of the first layer test for all printers. Ideal for all printers. Contains models: 225x225 -256x256 -300x300 -350x350 -400x400 Beautifully set up the perfect first layer! :-) I used PLA as the…
A recreation of the Voron Design Calibration Cube. The Voron Design logo has been replaced with the Printables logo, and the holes have been redesigned to use Prusa MK3 parts as their dimensional accuracy test. Tuning Guide: Follow the…
INTRODUCTION: Use the included Fusion360 parameterized model to determine how many bins (i.e. trials) of different z-levels you want to include. You can also change the width and length of each bin (as well as the tab size) in this fully…
See my comment in the original model to find more pictures =========================== See my other models to have a complete and very usefull chimney : M2 Insert :…
Metal Ammo Cans provide a watertight and somewhat flame resistant storage container for Lipo Batteries (your results may vary). I created this divider to hold 10 1700mah 6s packs upright. The end two dividers will fit even larger packs…
For storage of one set of bullet and case collators/feeders and two feeder plates. Print instructions No specific requirements. No support, no brim.
A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…
Lightning-infill really shines here. I also included a simple configurable crossguard to make your knife look more swordy. Remember to use a brim for the guard to help the spheres stick to the sheet. Legend says that the one who can pull…
Model was designed to visually indicate any bed warping and inconsistencies leading to print issues. This model prints a single layer at 0.2mm and 2 walls at 0.5mm.
Rather than using a wire-tie, print this set of test strips to calibrate the height of your PINDA sensor on the i3MK3S+ or similar. If you're following the manual, start with the 1mm strip instead of the wire tie. Place your nozzle so…
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
A calibration cube. Tests your printers calibration.
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
I have a MK3.5 upgraded from a MK3S, and a Revo 6 hotend on it. When ever i change the revo nozzles i like to quickly check if i need to adjust the Z height slightly, that is what these squares are for. Each set of squares is one layer…
This is a holder designed to hold exactly 3 original Uwell Pods without much wiggle-room to reduce potential noise. It also features a snap-fit top cover to hold the pods in place. Print Settings Printer Brand: Prusa Printer: Mini+…
Both T1 and T2 combs are mirrored and facing each other at 1 mm distance, and the comb for T2 (or T3 to T5) is scaled down to 96.66% in length (so it measured 58 mm instead of 60 mm). Line width is 0.88 mm, height is 0.53 mm (60 % of line…
Stand for Captain Slug's Caliburn 4 pump action blaster. The Caliburn4Stand fits in Talon magazine loader. The barrel can be supported under the Doom with either the Caliburn4U or the Caliburn4Rail attached to the Doom picatinny.
A caliber case composed of two separate parts designed to fit together seamlessly. The top component features the word "calibro" engraved in negative relief. In a separate file, there is a matching positive relief of the same word,…
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
Simple case for 2x Uwell Caliburn X Pod. Glue 6x2mm magnets into the holes. If the pods are little bit loose in the case, you can simply add some layers of transparent tape to both parts of case.
When you introduce a new spool, often the first thing to print is something to calibrate. This print is done in 90 minutes on average and contains everything for basic initial calibration. But to add function, it can also be used as a…
The first two photos show a 50-75 and a 55-80degree on my MK4(+) - the following is just the 50-75degree. I wanted an overhang test for my MK4, after I put on an MK4S fan! The numbered degrees on all the other overhang tests never turned…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Ein ganz einfacher Calibration Cube.
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Update January 11, 2022 Thanks for the feedback so far, great to see so many makes! I've optimized the bottom thickness to save some material and it will also print faster. I've also uploaded new versions that are only half as tall for an…
Introducing the Orca Cube! A functional calibration cube — don’t just throw it away; you can store small bolts and screws in it. ;) It's a bit challenging to print it nicely, but with a little calibration , you can do it. It's quite…
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
A perfect simple calibration cube that also tests overhangs with its 45 degree overhanging edges, I've also added a cube with no overhangs if you want. 20mm x 20mm x 20mm 0.2mm layer height and a 0.4mm nozzle 20% infill 100% fan speed…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
The Voron Design Calibration Cube: a precision tool tailored for optimizing your printer settings to achieve the best results when printing Voron Design components. Designed following a comprehensive set of design principles, this cube…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Projectvideo: https://youtu.be/IWbeTUQQgZ4 I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs Hinged Calibration Cube: https://www.printables.com/model/74825…
Hi there, long ago i print my first file with my 3D-Printer. The file was a little Test Cube. Unfortunately i didn't found the file anymore so i created a new one by myself. I'm sorry that i can't give a reference. Enjoy and please leave…
English below! Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen. die Kurzanleitung zu dieser Vorgehensweise…
XYZ Calibration Cube 20x20x20mm
Simple single layer cube to help you tweak your z offset. Print at .2mm Layer height Scale X,Y, if you want it to cover more of the build plate
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
This is a precision 20mm XYZ calibration cube which improves on the typical calcube. There are two issues with the typical cal cube: 1) Hard to make an accurate Z axis measurement because either you have error from the squish of the first…
THE TEST DISC Simple, yet VERY effective way to dial in your Z-offset to perfection. Notice the change in the image. From right to left, as I adjust (Baby Step up/down) the z-offset. Example: I started at a z-offset = -0.98 (which felt…
iDig3Dprinting Calibration Cube < link >
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Flow calibration tool specifically for flexi or articulating 3D prints, like our Spiders. If your Flexi models are fusing together, feel too loose, or it seems like small gaps are being fused, you likely need to adjust your Flow Rate for…
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
I designed the cube in the attempt to make a calibration cube gave gave much more information about your setting than just directions. Here's a run down of all the test it has in it Labeled Dimensions to see how your printer/slicer is…
This is an advanced calibration, recommended only to experienced users. For more information, read this article . Material Layer height | Fastest speed | PrusaSlicer profile </tr> 0.2mm | 45mm/s QUALITY 0.2mm | 60mm/s SPEED 0.3mm | 50mm/s…
0.4 mm Nozzle, 0.4 mm wall thickness Print with 2 walls (0.8 mm total thickness), 0 top layers, 0% Infill, 100% Flow. Use calipers to measure the 4 side walls & take the average. Calculate flow as (Desired Thickness / Measured Average) x…
UPDATED 2023-07-25: Added a guide on how to use this test, plus other additional info. If you're interested just in using the test, don't read it whole; just read the “What is the Blending Distance (BD)?” section and do the steps of…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
- please comment if you want a model with curved or slightly smoother edges. This is a calibration cube which all sides should add up to 20mm which you can use to fine tune your 3D printer using digital callipers and it also includes a…
Beachtet auch meine neue Version des LYNX Blaster CALIBURN 4 - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Es handelt sich hierbei nicht um Kinderspielzeug und…
