FT-5 carriage back w/timing belt holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of trying to thread the timing belt on the FT-5 carriage so I made a fix. This was remixed from my other…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was tired of trying to thread the timing belt on the FT-5 carriage so I made a fix. This was remixed from my other designs. It should work with the other stock carriage parts but I would just download the other parts from my other designs. They work a lot better than the stock wood parts.
V2.5 is for those who upgraded to a 10 X 15 cable chain like I did. It so you can hit the X axis home switch before hitting the cable chain.
https://www.thingiverse.com/thing:1912004 https://www.thingiverse.com/thing:2351400
Category: 3D Printer Parts