166 modeli
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Just slightly remixed model (https://www.printables.com/cs/model/518519-btt-pi-tft50-v21-screen-mount-for-voron-skirts) cutout for reset button frame is around whole display with cutout for buttons (just remove supports) I used this…
Update der Display Aufnahme für Bigtreetech btt pi tft50 v.2.1 Das Original Display Halterung ist unter https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/alanho/BTT_PITFT50_v2_Mount zu finden. Der Original Halter für den…
TFT 5" holder for Voron BTT 2.0 TFT50 this is a remix of ryanwilson's TFT holder. I raised the edge a bit to close the gap in the frame. After printing just break away the bridging bar. For printing please use the original instructions.…
A small table stand for the Yaesu FT5-DE/DR handheld radio. Have not tested with earlier models, but should fit FT3D at least. Printing: No special considerations, this should be an easy one to print.
…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…
UPDATE: Added the 2.1 version (untested) Designed with air flow in mind this light weight case. M2.5mm stands that came with the Big Tree Tech TFT50 is used in this. If it is missing they are 17mm long. There are 2 M3 size on each side of…
Housing for BigTreeTech TFT50v2.0 (Revision 2) Pi mounting holes on the back can be used for the mount. (Mount is designed by Simon Vez) Opening for Pi Cam cable. Opening for the brightness wheel. Can also be used without the Back Cover.…
This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…
** Made some edits to the design so you can now use the original M2 screws that come with the screen. I also adjusted the gap between the 2 mounting holes as they did not align 100%. This is a screen mount for the BigTreeTech Pi TFT50…
Remix of PITFT50 Mount for the BTT PITFT50 HDMI by CannedBass https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/PITFT50_45_degree_mount BOM: 4x M3 Brass Inserts 4x M3x8 FHCS 2x M3 Hammer(T)-Nuts 2x M3x8 SHCS
This is a mount for the v2.1 version of the BTT Pi TFT50 screen for Voron skirts. It is designed copying the v2 mount from alanho in the VoronUsers github. The v2.1 went to 3 buttons instead of a rotary knob for brightness and a switch…
45-degree mount for BTT PiTFT50 display to also work with the Clicky-Clack door modification intended for Voron 2.4. Display holder was found here: TFT 5" holder for Voron 2.4 - BTT PITFT50 by Alego | Download free STL model |…
This is my take on a case for an RPI 3B+ attached to a BTT TFT50 v2.1 screen with ventilation and access to the screen buttons. Useful for a remote klipper screen install, Homeassistant dashboards or anything a little touchscreen computer…
This is a screen mount for the BigTreeTech Pi TFT50 touch screen. This mount is designed to be used with the Raspberry Pi directly mounted to the back minimising cable mess. This screen is superb as it powers from the Raspberry pi…
After changing my Ender 3 S1 using Klipper, I also had to change the Stock-Display, because it became unusable. For the BTT PITFT50 Screen Mount , found at: https://www.thingiverse.com/thing:4800945 , I created a holder to change the…
Simple ventilated case. I use without radiators, with a fan for blowing inside, connected to 3.3v (not to 5 volts) - this is enough to cool and it is very quiet. In a room of 26 degrees C, the pi sensor shows 38-40 degrees C. Required:…
I couldn't find exactly what I wanted so I designed it myself. And I must tell you that it is very beautiful! I made a thin, sleek, minimal and sturdy vertical PITFT50 V2 display mount for the Ender 3 S1 and S1 Pro without the Raspberry…
A Mount for the BTT TFT50 V2 screen (KlipperScreen) for the Voron Switchwire It's designed to use the frame created by ryanwilson ( VoronUsers/printer_mods/alanho/BTT_PITFT50_v2_Mount at master · VoronDesign/VoronUsers · GitHub )
This is a display mount for the BigTreeTech TFT50 touch display for Elegoo Neptune 3 Pro/Plus/Max series printers. This mount replaces the included display and mount, and re-uses the screws from the original display mount. There is room…
What was originally supposed to be a quick modification of an existing case turned into a few hours long new design from scratch with improvements! The case was designed with the following goals: printable with minimal supports only use…
Currently untested, will update post or model when fully tested. Designed primarily for my Rat Rig Vcore 3 printers, but would work for any 3030 extrusion. BOM: BTT PiTFT50 v2 Touchscreen M3 x 8 screws - x4 M3 Brass Inserts - x4 M2.5 x 6…
I needed a case to fit the BigTreeTech PiTFT50 v 2.1. There are several cases out there for prior versions of the screen, but I couldn't find one to fit the latest version that I liked. There are a couple of key differences in v2.1 versus…
Revision 3 of my BTT TFT50v2 Case. You'll need to cut/desolder the white marlin connector on the TFT50v2 to use this case. Snug fit 4 Back versions, pick your poison! 2 Front versions. Step file included. The back designs include: VzBot…
BTT PI TFT50 v2.1 mount for Voron 2 with option to mount a RPi. Mount the screen and if you want mount the RPI there are holes suitable for M2.5 heatset inserts for RPi standoffs on the back face. I have allowed for a couple of positions…
Replaces the original Display Mount. Used with a Raspberry Pi with Klipper and KlipperScreen. It's thicker than the original Display Mount for extra stability. To install you have to loosen the screws a bit, slot in the new mount and…
Very minimum mount for attaching a BigTree Tech PITFT50 V2 to a 2020 extrusion. Angle adjustable, default is 55 degree. It has room for a attaching pi in the back. My main goal for a mount is to still be able to adjust the brightness…
Needed a simple and easy to use solution for mounting my FT5DE into my car and had suitable AMPS and RAM mounting hardware already present. So i came up with this simple adapter for quick and easy mounting of the handheld. The adapter is…
Remix of RobReason_2182184's Version for the BTT TFT V2.1 to work with the Clicky Clacky Door Mod. I extended the TFT-Mount by 20/23mm mm to have access to the Full Screen when the Door is closed. There are two Versions, one is 20mm and…
I wanted a case that fitted the BTT PiTFT50 and the Pi but none of the others out there filled my needs. I designed a basic right angle mount which I will be attaching to the front of my desk. Uses Go Pro style connections and I have…
The original model ( https://www.thingiverse.com/thing:4661122 ) was not "watering". I fixed it. Other than that I printed at 80mm/s I have all care in improving his model as I have a plethora of cables running out from my Pi 3 B+ and…
The original project was “watering". My remix eliminated these flaws. Made, as per the original project with 25% infill. All merits go to the original project of dalpek @ https://www.thingiverse.com/dalpek/designs who is the original…
Symmetrical modification of the BIGTREETECH pttft50 screen holder. Upgrade to a model created by ROBY. Note, the distance between the holder and the stand connecting 2 elements has changed. The holder is suitable for screwing directly to…
Mounting arms to be used in conjunction with StvnLntz BTT TFT50 v2.0 Case. https://www.printables.com/model/198864-btt-tft50-v20-casehousing-mount-revision-2 I added the arms off of the panel holders used for the enclosure 2.0 so it is…
Picture of the final build will follow This is my version of the TFT50 Screen from BigTreeTech. Ive added a magnetic mount so the screen can be easily removed for maintenance. It is also compatible with the Clicky Clacky Door. It useses…
Using @jentry's Pi TFT50 bracket as a base I created a top mount for the Voron Trident/1.8/2.4/Legacy series. This makes the display much easier to view and interact with if your Voron is on a table that's waist height. It also doubles as…
Modified screen cover for the BTT PITFT50 V2.1 screen which has three buttons in a slightly different position and size on the bottom of the screen to adjust brightness compared to V2.0 which used a thumb wheel. To be used with the…
I took the original design and remixed it to work with a 40x40mm Fan that is more common. It was a tight fit, but I was able to get it to fit. Same print settings were used from the original design.
updated Jan13: rev 3 should be safe to print and test. I printed rev 2 for the raspberry pi 3 and tft50 v2.0, and only one tiny fix was needed which is fixed in rev3 updated Jan12: there was a small area that needed shaving also tweaked…
***This file has been printed with abs and Ellis tuning guide … but you should be fine printing it at your own parameters if your EM is tuned properly. I normally print those parts with the www.zerog.one settings.*** This is a remix ive…
Revamp of the original screen mount by Fizzy . Added buttons to the bottom of the print. No glue or extra parts required. Made screw holes sturdier. Added chamfer on bottom layer to prevent elephant foot.
This mount will fit a BIGTREETECH PITFT50 V2.0 5" Pi display. There are two files, a front and a back. Once printed, it requires 4 10mm countersunk type screws to attach. There is an optional wedge piece that can be printed to angle the…
Cathodic TV-style case for BTT PITFT50 V2.1 screen + RPI4 + fan This was designed so i don't buy anything else than what i had on hand, you will find a recap of what's needed down below. The main concern when designing this was airflow :…
A while back I converted my Qidi X-Pro over to a Lerdge K and it worked great for quite some time. It wasn't perfect but it was a nice configurable upgrade that made some really nice prints. Recently when making a klicky style probe for…
Display Halterung für 5" Display (BIGTREETECH PI TFT50) für Anycubic i3 Mega (S) Diese Display Halterung kann in PLA / PLA+ / PETG / ABA usw. gedruckt werden. Es wurde mit folgenden Einstellungen gedruckt: Layerhöhe: 0,20mm Infill: 15 -…
Bigtreetech PITFT50 display base for TwoTrees Sapphire Plus V2. Place 4 M3 metal inserts to fix the cover with the screen to the base. To fix it to the printer, it can be done by drilling 3 holes to use M4 screws or use double-sided tape.
VzBoT - Installing BTT PI TFT50 - Raspberry Pi Display LCD Touch Screen We were tired of the constant screen sleep and strange behavior of the FLY LCD GEN display supplied in the assembly kit. We replaced it with a BTT PI TFT50 but the…
This is a remix of the incredible BigTreeTech TFT70, TFT35, SKR, Raspberry Pi Case by max_davis (Thing ID 4568324) that I have adapted to my own setup. The case includes space for an SKR 1.4Turbo, a Raspberry Pi with a buck converter for…
This is a corner bracket that can be used for 2020 extrusion that was made for my Folgertech FT5. I have included the STEP file if you want to modify it Category: 3D Printer Parts
Raspberry pi + PiTFT50 screen mount on the Anycubic Kobra Go. It attaches to 4040 extrusion. Printed it using 3 perimeters, 0.2 resolution and 15% gyroid fill.
A stand to store your FT5D in when you aren't using it. Includes a cutout so you can connect the charging cable. I printed this at 20% infill using eSun PLA+.
I wanted to power the touch screen and Pi with POE which provided a single wire coming to the device from the side rather than the top. Since I was cutting a hole in the side of the case I also went ahead an modified the rear panel to…
Modified original case to fit the BTT PITFT50.
Designed this sleeve for carrying around a spare battery for the Yaesu Ft5dr. Specifically the SBR-14Li battery. Its nothing fancy just practical and keeps the contacts from shorting inside a bag or pocket.
Looking around I couldn't find a means to mount my BTT TFT50 Touchscreen to my Voron0, So I decided to make one :). Be mindful that this suits the 0.2 style legs and not the 0.1. Please note: The original frame insert was backwards (my…
If you want to replace the dated Creality Touchscreen on the Sermoon D1, and also replace the firmware with something that actually works, then this mod is for you. The original screen has been replaced with BigTreeTech TFT5 v2.1, and the…
BTT Pi TFT50 v2.1 Mount for K1/K1C/K1Max
Redesigned the bracket to work with the elegoo neptune 2 which doesn't have the top channels on the aluminum extrusions. I also modified the case for the screen to allow access to the brightness dial and screen flip switch. Category: 3D…
BigtreeTech PITFT50 DSI LCD Mount for RatRig V-Core 3030 Frame or any 3030 Frame. Use remaining parts from original model. You will need all printed parts and this nut and screws: 4x M2.5x10mm or 4x M2.5x8mm cap head screws 4x M3x8mm cap…
i used the V2 Mount with the outter most holes, and the spacer to mount my BTT TFT50 inside the screen case from this design: https://www.printables.com/model/445961-btt-pitft50-screen-case-mount-for-v-slot-ender as the original authors…
This is a holder for the BTT TFT50 screen with a power on-off switch for the Rook2020 MK2 printer. The opening for the switch is 13 mm x 20 mm for a 2-pole rocker switch from Arcolectric (H8500VB01, i had it laying around). Use the…
I wanted to have a nice wall-mounted case for raspberry pi 4 and BTT PiTFT50 screen that would include everything in one package. Print out the parts, assemble, and hang them on the wall! When printing the only thing you have to flip is…
NOTE: I have changed some things since making this to fix problems and make things better, if things don't work and or don't fit together anymore, try to contact me and ill get it fixed. YOU WILL NEED: Raspberry pi 4 (Might work with…
I wanted a better mount for the PITFT50 display that I was using with OctoDash. This includes both the monitor case and the Z-axis frame mount.
Remix from Ken226's Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0 Extended by 23mm to access the Display when the door is closed.
This is BTT PITFT50 tabletop screen case that I remixed for my friend. It holds the screen with screwed-on Raspberry Pi. You have to use supports to print it.
Display for MK4 printer that I use with Octoprint or Repetier Server Material needed PiTFT50 Display…
A pivoting housing for the BTT TFT50 V3.0.1 as shell design. The display and the rear shell are fixed with 3mmx10mm self-tapping screws. M3x5x5mm press-in nuts are provided for the bracket and the rear access. Print with at least 4-5…
FOR BTT PI TFT50 V2.1! Print instructions Cover, back plate and supports can be printed from ASA, ABS, PETG, PLA or any other suitable material. Buttons are highly recommended to be printed from PETG or other flexible material. No…
I designed the enclosure and brackets to install the BTT PITFT50 screen on my V Minion. Worked out great for me.
Update 4/15/17: I moved the corner hole down so that you will always have two connection on each piece of extrusion. Design video: Link to the Onshape files if you want to customize:…
I made the brackets thinner and added 2020 interlocks to the brackets so they now lock into place. This adds better alignment and less dependency on the bracket screws to keep the joints aligned.
Remixed this part from this https://www.patreon.com/posts/41510619 to fit Anet style frames Edit: Cleaned up the model a little.
Simple mount for the BTT TFT50 touchscreen. Ideally, use 2x M3 bolts with T-nuts to hold the mount to the 2020 extrusion. It uses the TFT's supplied mounting hardware (small Phillips head screws) to attach the TFT50 to the mount.
Printed with ABS using the default Voron recommendations. I only uploaded one side. You need to duplicate the part and mirror it to have both sides! Print in the same orientation as on the cover photo.
A very rough mod for PiTFT50 V2 to the Anycubic Vyper, it uses the bracket from the original screen for the left or right side of the printer (the left side is under a different angle and is mounted on the top side of the bottom extrusion…
This is an assembly designed for use with the BTT TFT50 touch display and Raspberry Pi with Klipper Screen for mounting on top of a horizontal extrusion. Specifically I designed it for use with a default door configuration Voron V2.4, but…
I installed a btt pitft50 onto my voron v2 using alanho's mount and wanted to free up some space in my electronics bay by mounting the pi on the rear of the screen. This mount raises the pi allowing it to clear the screens mount and…
I've been working on it thru a few iterations. I like the BigTreeTech 5" tft 50 v3.0. The mounting solution from BTT lacked strength in my opinion, so I have been trying to fix it. So when I touched it there was too much flex. I put a…
It fits on 35mm monitor stand pole. Use M3 bolts and M3 4mm OD threaded heat set inserts.
BTT TFT50 screen mount requires 4 M3 heat set inserts.
Adapts https://www.printables.com/model/282522-pi-tft50-mount to accept https://www.printables.com/model/273885-mks-pi-ts35-box
Cyber-cover for BTT PITFT50
This is a modified version of the FT5 Corner bracket designed to be a filament spool holder. I have included the STEP file if you would like to modify it. I have been using this for over a year with no strength problems. Category: 3D…
A simple stand that creates a larger foorprint for the FT5 and offers more stability.
!!!These items are still WIP!!! UPDATE 1/31: Added FT4, FT10, and FT10/FT4 Merged copies that fit the new idler design. I do not have the bolt and bearings to test with so feedback or suggestions are welcome. UPDATE 11/20: Added a number…
Das Original ( https://www.thingiverse.com/thing:5881751 ) hat vorgesehen, dass der Pi an der Rückseite des Displays befestigt wird. Ich wollte das Display innerhalb des Gehäuses für meinen Neptune 3 Plus haben, aber den Pi außerhalb.…
Front mount for Big Tree Tech's TFT50 V3.0 screen. I made this for my Adimlab Gantry Pro printers, and has clearance for the Y-Axis tensioner, but will work on most printers with a similar frame, especially with a 2020 extrusion. Print…
If you want to download .STEP files vistit my Pateron
This is the Bezel for the TFT50 Housing. It allows you to keep your printer color scheme. Soon I'll upload files for the new housing with a slot for a Raspberry pi, Fan, Toggle/Rocker switch, and some dividers for the drawer. The housing…
I modified the screen back file to incorporate magnets. I had them laying around but I believe they’re 8x3 neodymium and I did a pause at layer height to insert them. The main body of the case can be downloaded from the vzbot GitHub…
Added 1mm more space for the display thickness Added buttons Customized back plate
These are cater mounts designed specifically for use with the 3in casters from harbor freight to allow your FT5 to roll around. The wheels are held in place with an M5 nut and bolt. I have been using these for over a year with no issue.…
I selected the minimum height that provides acceptable bending of the headphone cables. At the same time, the minimum material consumption and printing speed are ensured. It seems to me that the look is quite stylish and light. It is…
Výměna displeje u Sermoon d1 na BBT TFT PI 50 V2.1 pro klipperscreen
Adjustable z endstop system for the Foglertech FT-5 printer. I have the r1, but I imagine this would fit on the r2 as well. This eliminates the need to physically move the entire endstop up and down when trying to dial in the z endstop.…
Mount the PITFT50 touch screen case by mikes2277 directly to an Ender 3 V3 SE using the existing screen mounting holes.
A angled bracket and faceplate to mount a full graphic smart controller on the FolgerTech FT-5. Tilted at 30 degrees, it helps with usability and screen readability if you have your FT5 sitting on a low table, but also works any many…
This is an adapter/arm for using Sapencils great PITFT50 Shroud with standard 3030 aluminium extrusions. Two 10mm M5 screws with t-nuts are required for mounting. I just uploaded the newly designed mount (both as STL and FreeCAD .fcstd),…
![Case for BigTreeTech PITFT50 V1.0 and Raspberry Pi 4 Model B [source available]](https://media.printables.com/media/prints/581604/images/4642964_c89680a9-52c5-42f5-8a9a-f1a184770f4b/btt-pitft50-rpi4b-case.png)
![BTT 5 inch TFT50 Touchscreen Holder with Switch [Rook 2020 MK2]](https://media.printables.com/media/prints/893367/images/6837938_2efe8bde-a80c-4448-996b-48c1b227884c_ac1475a1-bf9d-4fa3-b1bd-22368c28aa5d/2024-05-27-11-52-03-316.jpg)
