S800 Reptile Matek F411-Wing Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this mounting plate to properly center a Matek F411-Wing FC in the Reptile S800. The FC guides are a pretty…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I made this mounting plate to properly center a Matek F411-Wing FC in the Reptile S800. The FC guides are a pretty tight fit, which enables you to to just clip the FC in there. I still used a bit of double sided tape. I used CA Glue to fix the plate in the wing. You could hot glue it in, bit my s800 had crack in its body so i kinda use the mounting plate and CA glue to stablilize the body. One corner is lifted a bit from the build plate to help getting the print of the build plate.
No supports or rafts need
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cDQjXtkYVyM
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20
Category: R/C Vehicles