P
PrintablesMattyT
DEWALT DXFRS800 Replacement Knob
Replacement knob for lost original
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
Wyniki wyszukiwania: s800
Liczymy pasujące modele…
P
PrintablesEddi Maevski
S800 Reptile Sky Shadow Control Horns
S800 Reptile Sky Shadow Control Horns Designed to fit the reptile S800 Sky Shadow, the original horns are a joke. Recommended print materials: Nylon carbon. PETG. ABS Print orientation Everything can be printed normally (as shown). Some…
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCubic
Tripodmount Siglent SDS800X SDS804
Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…
- Pobrania
- 52
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRumagelo
Siglent SDS800X HD 100mm VESA mount
Print 2 grippers, body with supports for the nut holes. 3 perimeters but infill can be light. Hardware: 10 M3 nuts and bolts 17-40 mm long. Longer than 25 mm will interfere with the power cord so only 9 can be installed. Also comes with a…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesXadro
Reptile SkyShadow S800 Original Winglet
This is my Reverse Engineered Model aswell as the Raw scan, feel free to do what you like with it, if you manage to make a better printable model, please let me know. Spiral Vase Printable, makes it go a lot faster and comes out lighter…
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOssilampe
Halter für Shimano Ladegerät Steps8000 Huasquarna
Um meine Ladegerät für das ebike an die wand zu hängen
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBlackbird
clean pod Philips S8000
Got a Philips series 8000 wet and dry shaver. The bundle didnt include the quick clean pod. The original is just a bowl with lid and otherwise empty, no function at all for the money they ask for. The cartridges with their secret cleaning…
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTraube
Intruder VS800 / VS1400 Seitendeckelaufnahme
Dies ist eine Seitendeckelaufnahme für die Suzuki VS800 / VS1400. Ich habe einen M6x20mm VA Sechskantschraube eingeklebt! Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: 0,2 Infill: 25 Category: Other
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMrAP
McCulloch Rob S800 rear wheel
Replacement rear wheel for McCullogh/Husqvarna robotics mover. Very expensive to buy so I made a printable replacement, use 3mm screws to connect the halves. Print Settings Printer Brand: VoronDesign Printer: Voron2 350 **Rafts:** No…
- Pobrania
- 30
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSmithpl
Reptile S800 Sky Shadow - Walksnail Avatar HD mount
I've designed a simple mount box to replace fron foam in S800. In from Cam Mount you can use Walksnail VTX Mini/Nano/HD/HD pro. All wires to FC are going on back. Ther is a simple system to open it without any screw Category: R/C Vehicles
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMDTech
FPV EPP Reptile S800 SKY SHADOW Fixed Wing Haube 4S
ist die Haube / Abdeckung für FPV EPP Reptile S800 SKY SHADOW als 4S Version
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesForrest
22xx Removable Countersunk Motor Mount - Wing reptile s800
This motor mount can be used to bolt a 22xx size motor to a plate, so that you can take the motor on and off as needed. Parts required: M3 6mm Cap head 4x M3 6mm Countersunk 4x Category: R/C Vehicles
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 5
P
Printablesbaztm
S800 Tool-less Removable Wingtips
Detachable winglets for the FPV wing Reptile S800. I didn't fancy using the integrated nuts and bolts one as it seemed like added weight and complexity so I thought I'd go and make my own entirely 3D printed. Each side weighs about 8g…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEddi Maevski
Wings Wall Mount, S800, C1 Chaser and Mini Drak
Wings Wall Mount, S800, C1 Chaser and Mini Drak. Designed to put wings on the wall, each model mounts are specific per LE thickness and sweep angle. Recommended print materials: PLA+. PLA. Print orientation File need to be oriented flat…
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBoopidoo
Sky Shadow S800 Tailsitter
These parts are for converting the Sky Shadow 800 to a dual-tractor tailsitter. The motor mounts fit any motor with CC 16-19mm. The wingtip fins replace the original fins. The fins also acts as landing gear. I designed a conforming tail…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
S800 Reptile Sky Shadow Skids, Skid, Protectors
S800 Reptile Sky Shadow Skids Designed to fit the reptile S800 Sky Shadow, provides means of protection for the bottom during those "rough" landings. Recommended print materials: Nylon carbon. PETG. ABS Instructions Glue into place using…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPierre
S800 Sky shadow Wall Support
Simple wall mount for th S800 SKYSHADOW Category: DIY
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKinetik
Adapter Scheppach BTS800 to Dyson
Customized version of https://www.thingiverse.com/thing:1246651 Instructions Using the following options: LargeEndMeasured = outside LargeEndDiameter = 57 LargeEndLength = 15 SmallEndMeasured = outside SmallEndDiameter = 38.5…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablessidjej
S800 Reptile Matek F411-Wing Mount
I made this mounting plate to properly center a Matek F411-Wing FC in the Reptile S800. The FC guides are a pretty tight fit, which enables you to to just clip the FC in there. I still used a bit of double sided tape. I used CA Glue to…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJBabio
DJI S800 ESC LED Dome
The LED of DJI S800 ESCs is soldered in the bottom of the PCB and protrudes. This makes very easy to damage the LED if you not take care when leaving the arm in the ground. Also, l wanted to label the arms to know instantly which motor…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesdemjansein
osVac M32 adapter for Primaster jigsaw PMPS800
osVac Adapter for the flimsy-bajonet-style M30 of my Primaster PMPS800 jigsaw used this as a starting point: https://www.thingiverse.com/thing:4671596 Category: Tools
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFPVLeo
Reptile S800 air intake / inlet
A little air inlet to keep the Flightcontroller and other electronics used inside the S800 cool and working. Category: R/C Vehicles
- Pobrania
- 11
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBoopidoo
Sky Shadow S800 Nose
Made this nose to house camera and vtx. The plan is to make several variants for walksnail and DJI but right now only for analog. There is room for a small 25x25mm fan but for now it is only air cooled with directed air channels. If you…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesoXiVanisher
FPV Camera seat for Reptile S800 sky shadow
Just a really simple seat to mount a Foxeer cam more easily in to the Reptile s800 sky shadow. Category: R/C Vehicles
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPierre
S800 VTX Cover for Foxeer TM25 transmitter
This a remix for the Foxeer TM25 transmitter Category: R/C Vehicles
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesjostak
S800 block for RunCam Split 2
I have designed this block to get the 1 axis gimbal using the RunCam Split 2 camera and 9gr Tower Pro Servo. It works really nice, giving the ability to see not only what is in front of the model, but also what is below. It covers…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPierre
S800 Sky shadow Video Mount Antenna
Antenna mount for VTX. Last version with larger base to get stronger fit Print Settings Printer: fabrikator mini 2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: R/C Vehicles
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printables
clean pod Philips S8000
Got a Philips series 8000 wet and dry shaver. The bundle didnt include the quick clean pod. The original is just a bowl with lid and otherwise empty, no function at all for the money they ask for. The cartridges with their secret cleaning…
P
Printables
Zalman MS800 Case internal fan holder
This model can be printed in PLA or PETG. Requires support for thread print in current orientation.
P
Printables
Nokia BL-5C BL5C to FS-B800 FS800B B800 Battery adapter
The BL-5C is a 3.7V, 800-1000 mAh battery (about 6mm thick) The FS-B800 or B800 is an 8mm thick battery, slightly longer and wider than the BL-5C. However, it cost almost three times as much. And as you can see in the picture, it's all…
P
Printables
Sky Shadow S800 Tailsitter
These parts are for converting the Sky Shadow 800 to a dual-tractor tailsitter. The motor mounts fit any motor with CC 16-19mm. The wingtip fins replace the original fins. The fins also acts as landing gear. I designed a conforming tail…
P
Printables
Zalman MS800 Case internal fan holder
This model can be printed in PLA or PETG. Requires support for thread print in current orientation.
P
Printables
Nokia BL-5C BL5C to FS-B800 FS800B B800 Battery adapter
The BL-5C is a 3.7V, 800-1000 mAh battery (about 6mm thick) The FS-B800 or B800 is an 8mm thick battery, slightly longer and wider than the BL-5C. However, it cost almost three times as much. And as you can see in the picture, it's all…
P
Printables
FTX- 1 Face Plate for tablet base w/ cs800
Removable face plates made to fit in a 8 inch tablet holder.
P
Printables
S800 extended fpv cam only nose
Made to fit a runcam eagle, but could fit other hs1177 type cams. print without suppport Category: R/C Vehicles
P
Printables
S800 Sky Shadow Wing Fence
glue 2 of them on each side and parallel to the electronics bay, make sure to glue them behind the cg Update: added slim version, if you don't like printing it vertical you could just could place one of the sides on the bed and drop it…
P
Printables
S800 Sky Shadow HD Zero Camera Pod
This is a remix from a dual camera S800 Sky Shadow Camera pod. I wanted to make sure I had something that fit my HD Zero setup and was properly cooled and easy to setup. I went through 4 versions to get to this one and ended up printing…
P
Printables
Carbon Core to DJI S800 Legs
I've made this part to connect my Carbon Core Octocopter 1000 (transformed to X8) to the legs of my DJI S800. The installation in the multicopter is the same as the standard legs and it's fixed to the landing gear with zip-ties. Two STLs…
P
Printables
S800 H-frame to T-frame (legs) connector.
I never liked the way the H & T frames are meant to be conected on the DJI S800. The Bi-pod drawbars where bad implemented and you have to file them to be able to install them so, when I decided to replace the S800 with a CF X8 keeping…
P
Printables
s800 micro fpv mount keyway
s800 micro style fpv camera mount totally redesign to accommodate this kind of cameras with an easy way to swap the camera with 2 screws. Lens hole is 12.6mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
P
Printables
1992 Suzuki Intruder VS800 Front Fork Seal Driver
I needed to change the fork scraper seals of my 1992 Suzuki Intruder 800. Already put up the Tool from Suzuki, and thought might as well upload the Seal Driver I made for the job. I used PLA for the job and printed the model up side down.…
P
Printables
S800 Reptile Canopy
Also good as a replacement if you've lost yours. https://www.thingiverse.com/thing:2150771