1 / 4
S800 H-frame to T-frame (legs) connector. — zdjęcie 1
1 / 4

S800 H-frame to T-frame (legs) connector.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter plates to connect the DJI S800 H-frame to T-frame more securely.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

I never liked the way the H & T frames are meant to be conected on the DJI S800. The Bi-pod drawbars where bad implemented and you have to file them to be able to install them so, when I decided to replace the S800 with a CF X8 keeping the H & T Frames to carry the Zenmuse Z15, I've started to think of a different way of attaching them.

And this is how I made these adapter plates.

For more details see "Instructions"

If you think it deserves downloading... Please leave a Like!

Be proud, Show your makes!

Instructions

I've printed the part using 70% Infill to make it solid.

Your printer needs to be precise making circles to pass the h frame through the holes. It's good to be snug fitted. the same can be applied for the 25mm tube clamp slots.

Printed parts:

Printing the STL you'll have both sides of a leg. You need to print the STL 2 times to get the 4 plates needed.

Aditional parts:

4x 25mm tube clamp.

2x 12mm tube clamp.

You can fin clamps similar to the ones I've used here: http://www.aliexpress.com/item/4x-CNC-Aluminum-20MM-Arm-Clamp-Tube-Mount-for-DIY-Quadcopter-Hexa-Multirotor/1880955346.html

Category: R/C Vehicles

Tagi