1 / 4
S800 H-frame to T-frame (legs) connector. — image 1
1 / 4

S800 H-frame to T-frame (legs) connector.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter plates to connect the DJI S800 H-frame to T-frame more securely.

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I never liked the way the H & T frames are meant to be conected on the DJI S800. The Bi-pod drawbars where bad implemented and you have to file them to be able to install them so, when I decided to replace the S800 with a CF X8 keeping the H & T Frames to carry the Zenmuse Z15, I've started to think of a different way of attaching them.

And this is how I made these adapter plates.

For more details see "Instructions"

If you think it deserves downloading... Please leave a Like!

Be proud, Show your makes!

Instructions

I've printed the part using 70% Infill to make it solid.

Your printer needs to be precise making circles to pass the h frame through the holes. It's good to be snug fitted. the same can be applied for the 25mm tube clamp slots.

Printed parts:

Printing the STL you'll have both sides of a leg. You need to print the STL 2 times to get the 4 plates needed.

Aditional parts:

4x 25mm tube clamp.

2x 12mm tube clamp.

You can fin clamps similar to the ones I've used here: http://www.aliexpress.com/item/4x-CNC-Aluminum-20MM-Arm-Clamp-Tube-Mount-for-DIY-Quadcopter-Hexa-Multirotor/1880955346.html

Category: R/C Vehicles

Tags