PrintABlok Modular Building Block Base Bloks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interlocking building toys created for 3D printing by the 3D Printing Professor.
- Ocena
- 4,882 / 5
- Polubienia
- 1088
- Pobrania
- 3964
- Wydruki
- 44
- Wyświetlenia
- 34 601
- Oceny
- 34
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block out there.
This is the base set of PrintABlok including many common shapes and sizes to get started with building.
If you are interested in getting a greater variety of blocks, including articulated blocks and decorative elements to build PrintABlok mechs, you can check premium sets here:
Recommended Printing Tips
While printabloks are design and will print will with any material and most common settings, for best results the following is recommended:
- Layer height 0.16 or lower
- Print connectors in PetG
And that's it. Enjoy.
Updates:
5/2022 - New and improved connectors and holes added to add pieces.