Ryobi P440 1/4 Sheet Sander Vacuum Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing allows you to hook up a Ryobi P440 1/4 Sheet Sander to a shop vac with a 1.25 inch (31.5mm) hose.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This thing allows you to hook up a Ryobi P440 1/4 Sheet Sander to a shop vac with a 1.25 inch (31.5mm) hose.
The documentation says that Ryobi sells a vacuum adapter separately. After spending several minutes trying to find where I could buy one, I decided to design and print one instead.
There will be some strain on this part, so I recommend you print in PETG if possible. I'm sure PLA would work too...I just had PETG loaded in the printer.
Ok....print it as solid as you can. I would crank up the number of perimeters versus setting the infill to 100%.
Mine has been working great for a few hours of sanding. I'm positive that I'll lose it before it breaks.
Print instructions
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 100%
Filament: Prusament PETG Jet Black
Notes:
I would recommend adding a brim and flipping the part so it stands on the circular opening.