Ryobi P440 1/4 Sheet Sander Vacuum Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing allows you to hook up a Ryobi P440 1/4 Sheet Sander to a shop vac with a 1.25 inch (31.5mm) hose.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 77
- Makes
- 1
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This thing allows you to hook up a Ryobi P440 1/4 Sheet Sander to a shop vac with a 1.25 inch (31.5mm) hose.
The documentation says that Ryobi sells a vacuum adapter separately. After spending several minutes trying to find where I could buy one, I decided to design and print one instead.
There will be some strain on this part, so I recommend you print in PETG if possible. I'm sure PLA would work too...I just had PETG loaded in the printer.
Ok....print it as solid as you can. I would crank up the number of perimeters versus setting the infill to 100%.
Mine has been working great for a few hours of sanding. I'm positive that I'll lose it before it breaks.
Print instructions
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 100%
Filament: Prusament PETG Jet Black
Notes:
I would recommend adding a brim and flipping the part so it stands on the circular opening.