Blips & Dips Vase Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun vase featuring raised and recessed spheres spiraling around
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 357
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
Watching these vase mode prints come to life is truly enjoyable! Not only are they aesthetically pleasing, but they also serve a practical purpose as storage containers. It's worth noting that when using a lower-end printer, adjusting the perimeter wall speed can greatly enhance the quality of the exterior finish. So, take your time and slow down for a smoother and more polished final product.
Scale it to be as tall or as short as you'd like!
Print Settings:
0.2mm layers, 0 top layers, 4 bottom layers, 0% infill, and use vase mode, increase the outer wall width to 0.8mm (there still may be some holes around this vase print; it's not a water tight container)