Plant Label Blanc, Inscribable, Print it - Bend it - Stick it
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plant labels for labelling by yourself with pen or labeling machine
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 2
- Wyświetlenia
- 218
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Plant labels for labelling by yourself.
(Use a waterproof pen or labeling machine)
Six different sizes available!
50mm, 60mm, 70mm, 80mm, 90mm, 100mm
The height of the label is always 18mm.
Maximum length of the file is currently 145mm, so it also fits on a Ender 2 or Prusa Mini+
Material: PLA
Tip: Activate ironing of the top surface when printing.
Printing the “Bending_Jig.stl” as bendingtool.
The jig helps to keep an angle of 90° in one direction and an angle of 20° in the second direction.
Caution: Danger of burns, hot water!!!
Bending the plate
- Pour hot water (80-100°C) into a bowl.
- Hold the shield in the boiling water (the bar softens very quickly).
- Align the plate on the bending device, there is a small mark/notch in the middle of the plate, this must be in line with the edge of the bending device. (see picture)
- Bend the rod of the template downwards and hold it until it is firm again.
Done :-)

There are also pre-labelled signs available.
English:
https://www.printables.com/de/model/479445-plant-label-print-it-bend-it-stick-it-english
Deutsch - German:
https://www.printables.com/de/model/477731-plant-label-print-it-bend-it-stick-it-german-deuts
Update 12/05/2023:
add video bending tutorial :)
