1 / 5
LGX lite MiniSB for Voron v0.2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So you've got an LGX lite and wanna show it, or other models are not your style? Try this one!
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 1512
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (48)Powiązane
So you've got an LGX lite and wanna show it, or other cowlings are not your style?
Try this one!
I remixed the official version for the bowden version of the v0.2, making it suitable to be used with the LGX lite.
This model also works for the v0.1, and certainly basically any other 3D printer (it will look cool in your ender 3 or any other machine you wanna mod).
Recommendations:
- Print it in ABS in an enclosed machine for maximum quality
- Nozzles of 0.6 mm work as great as nozzles of 0.4 mm
- Layers of 0.2 mm work great, but you could go as high as 0.32 mm
- Either go very slow (60 mm/s or lower) when printing the bridges for the part fans, or tune previously your machine to print bridges like a god
- 5mm length screws will work to attach the extruder, but 10 mm ones will work as great
- Assembly is not that easy (Sadly) but hardly ever would you need to detach the extruder from the cowling to do anything (coldpulls work just fine even with the extruder attached)
- Make sure the screws are flush with the model, or else there will be issues of the nozzle being tilted to the front when screwing the 3rd screw at the back (when using this in the v0.2)
Other than that, have fun!