1 / 1
Simple 100mm Duct Flange — zdjęcie 1

Simple 100mm Duct Flange

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple round base to be glued to a surface and allow duct hosing to be attached using clips.

Ocena
0 / 5
Polubienia
9
Pobrania
127
Wydruki
0
Wyświetlenia
559
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed to attach a 100mm hose to a spray booth filter hole for airbrushing. This is what I came up with after three minutes in FreeCAD. I designed it to be glued to the booth outlet and fitted to the hose using friction fitting and adjustable screw clips.

This prints as a solid part using a 0.4mm nozzle width and 0.2mm layer heights.

Tagi