1 / 1
VLSB Mods (Magazine with holes, Taller pump etc. — zdjęcie 1

VLSB Mods (Magazine with holes, Taller pump etc.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some mods that I made to tailor VLSB function more to my liking.

Ocena
0 / 5
Polubienia
19
Pobrania
22
Wydruki
0
Wyświetlenia
629
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of file on https://www.thingiverse.com/thing:5954410 . Version created around build guide V5, 12 May 2023.

Magazine Tubes: Holes along the length to check remaining shells. Holes are also MLok for accessories, but screw must be flush with inward face of T-nut or it may interfere with shell feed. Print with support unless you really trust your bridging. MLok holes should help with warping as well, but you'll still probably have to sand. Holes for side rails are reinforced with extra perimeters (set slice gap closing radius to 0 in prusaslicer) and can be threaded in directly for light duty, or drilled and HSI'd for heavier stuff. Recommend M3x6mm mounting screws.

Pump: Back lip is bigger and I made the finger tabs taller to increase feed reliability

Future:
Sniper shell Maybe?

Speed Loader + Front piece?

Hip Magazine?

Shell Catcher?

Tagi