VLSB Mods (Magazine with holes, Taller pump etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some mods that I made to tailor VLSB function more to my liking.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 22
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of file on https://www.thingiverse.com/thing:5954410 . Version created around build guide V5, 12 May 2023.
Magazine Tubes: Holes along the length to check remaining shells. Holes are also MLok for accessories, but screw must be flush with inward face of T-nut or it may interfere with shell feed. Print with support unless you really trust your bridging. MLok holes should help with warping as well, but you'll still probably have to sand. Holes for side rails are reinforced with extra perimeters (set slice gap closing radius to 0 in prusaslicer) and can be threaded in directly for light duty, or drilled and HSI'd for heavier stuff. Recommend M3x6mm mounting screws.
Pump: Back lip is bigger and I made the finger tabs taller to increase feed reliability
Future:
Sniper shell Maybe?
Speed Loader + Front piece?
Hip Magazine?
Shell Catcher?