GridFinity-Efficiency Version (GridFiciency?)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptable grid system using inserts to define grid borders. This allows boxes to have flat bottoms and saves plastic.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 3168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A version of GridFinity with a focus on minimising plastic waste. This concept uses inserts for each grid line, allowing you to add or remove grid lines. This means you can have flat bottomed boxes, with a magnet only in each corner.
Parts are:
GridFinity-Efficiency-Baseplate - A single cell baseplate. To increase the number of grid cells just copy and past it every 42mm.
GridFinity-Efficiency-Inserts - A set of 4 inserts to make the grid lines themselves. Just push them into place.
GridFinity-Efficiency-Box_HighFloor - A box with a floor that is 3mm thick and is entirely flat.
GridFinity-Efficiency-Box_LowFloor - A box with a floor that is 1.6mm thick, with a small raised section in each corner for magnets.
Print a single cell and use that to test fit the inserts. You can fine-tune the “clip in/out” using the extrusion multiplier.
No options for screws on these. Magnets only. Feel free to remix though.