GridFinity-Efficiency Version (GridFiciency?)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adaptable grid system using inserts to define grid borders. This allows boxes to have flat bottoms and saves plastic.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 78
- Makes
- 1
- Views
- 3,168
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
A version of GridFinity with a focus on minimising plastic waste. This concept uses inserts for each grid line, allowing you to add or remove grid lines. This means you can have flat bottomed boxes, with a magnet only in each corner.
Parts are:
GridFinity-Efficiency-Baseplate - A single cell baseplate. To increase the number of grid cells just copy and past it every 42mm.
GridFinity-Efficiency-Inserts - A set of 4 inserts to make the grid lines themselves. Just push them into place.
GridFinity-Efficiency-Box_HighFloor - A box with a floor that is 3mm thick and is entirely flat.
GridFinity-Efficiency-Box_LowFloor - A box with a floor that is 1.6mm thick, with a small raised section in each corner for magnets.
Print a single cell and use that to test fit the inserts. You can fine-tune the “clip in/out” using the extrusion multiplier.
No options for screws on these. Magnets only. Feel free to remix though.