Aqara Temperature / Humidity Sensor Mount (magnet or screw)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a mount for aqara temp/humidity sensor
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
mount for aqara temperature and humidity sensor. one is just a one piece mount that has a centered countersunk screw hole. the other is 2-piece, and uses a french cleat. i included two. one french cleat has a countersunk screw hole. the other has a slot to accept a 10mm diameter magnet. this design has the advantage of being easily removable, and as you can see from the pictures, the battery can be replaced without removing the sensor from the mount. i also left a cutout for the pairing button and the opening for the sensor. i made them pretty slim, so they print quickly and don't use much filament
the magnet is 10mm diameter x 1.8mm depth. i got them on amazon. if you want to mount it with the magnetic cleat to a moving object like a fridge door, i would recommend using a bigger magnet (you'll have to adjust the the model)
the magnetic cleat is the only one that might need consideration when printing. you can print it without supports if you print it standing up, so the angled side is facing up, but you'll have to print slowly so it won't fall over during the print. the other 3 parts print as-is with no supports. i made these pretty thin so i recommend using arachne slicing