Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purge Slide for Bambu Lab Printer - thin profile
- Ocena
- 4,765 / 5
- Polubienia
- 193
- Pobrania
- 1561
- Wydruki
- 19
- Wyświetlenia
- 8422
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace.
Thanks to its magnetic attachment, the Purge Poop Slide is easy to attach and remove, while also allowing it to move effortlessly with your printer. This is especially beneficial if your printer has anti-vibration feet and tends to oscillate during printing, as the slide stays in place and moves with the printer, ensuring stability and reducing any potential rattling noises.
Print Time:
- ±2h10m
BOM:
- 15x Magnets (glue them in place)
- I have included two designs depending on the magnets you have.
- 8 to 10mm W x 1.8mm D
- 6 to 8mm W x 3mm D
- I have included two designs depending on the magnets you have.
Note: When selecting the bucket make sure there's enough space because my machine sits higher due to the squash ball feet. If your machine uses the standard feet and only has about ±30mm of space, use the bucket I've included that has a special cut-out for this
Print instructions:
- .24 layer
- 3+ perimeters
- Arachne Wall Generator
- ±30% infill
- Lightning Infill Pattern
- No Support
- PLA / PETG