1 / 6
Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic — image 1
1 / 6

Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Purge Slide for Bambu Lab Printer - thin profile

Rating
4.765 / 5
Likes
193
Downloads
1,561
Makes
19
Views
8,422
Reviews
17

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace.

Thanks to its magnetic attachment, the Purge Poop Slide is easy to attach and remove, while also allowing it to move effortlessly with your printer. This is especially beneficial if your printer has anti-vibration feet and tends to oscillate during printing, as the slide stays in place and moves with the printer, ensuring stability and reducing any potential rattling noises.

 
Print Time:
  • ±2h10m
BOM:
  • 15x Magnets (glue them in place)
    • I have included two designs depending on the magnets you have.
      • 8 to 10mm W x 1.8mm D
      • 6 to 8mm W x 3mm D

Note: When selecting the bucket make sure there's enough space because my machine sits higher due to the squash ball feet. If your machine uses the standard feet and only has about ±30mm of space, use the bucket I've included that has a special cut-out for this

 

Print instructions:
  • .24 layer
  • 3+ perimeters
  • Arachne Wall Generator
  • ±30% infill
  • Lightning Infill Pattern
  • No Support
  • PLA / PETG

Tags