Team Dynamics Pro Race 1.3 center cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Center cap for the TD Prorace 1.3 wheels that use 72mm bore. Possibly fits the Pro Race 1.2's but untested.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
In my past (unpublished) revisions, PLA has worked for 2 years of winter use. I've now beefed up the legs so they're not so fragile and break and a few further tweaks to stop it being as loose.
I'm now using 3dtomorrow's BioPro as an alternative to ABS/PETG so these should be suitable for any road use.
Print settings shouldn't matter, but I'm using 30% infill, 4 walls, top & bottom. This should make the legs solid which will be the most important.
Nov'24 model has been tweaked to fit 65mm face (so will work with stick-on logos from ebay etc)