Team Dynamics Pro Race 1.3 center cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Center cap for the TD Prorace 1.3 wheels that use 72mm bore. Possibly fits the Pro Race 1.2's but untested.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
In my past (unpublished) revisions, PLA has worked for 2 years of winter use. I've now beefed up the legs so they're not so fragile and break and a few further tweaks to stop it being as loose.
I'm now using 3dtomorrow's BioPro as an alternative to ABS/PETG so these should be suitable for any road use.
Print settings shouldn't matter, but I'm using 30% infill, 4 walls, top & bottom. This should make the legs solid which will be the most important.
Nov'24 model has been tweaked to fit 65mm face (so will work with stick-on logos from ebay etc)