Asrock Deskmini 120 mm fan Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling.
Attention: Necessity of irreversible case modification.
Fan compatibility tested:
- Noctua NF-A12x25 - compatible
- Noctua NF-A12x15 -incompatible (larger plastic shell compared to 25mm thick fan).
Furniture:
screws and nuts 3mm x4
2 washers
Print Settings
Rafts:
Yes
Supports:
No
Infill:
70%
Filament:
Basicfil PLAblack
Notes:
If you want to print in one piece, supports are required.
Both, 2-pieces and one piece models are included.
Post-Printing
Inf you printed in 2-pieces, you will need to glue together the parts.
Top part
Top part, side view
Gluing
To glue together, I used painter tape to prevent exec of glue sticking to frame around.
Preparing bottom
glued part with fan inserted afterwards to test
Case mod
Attention: Irreversible case modification.
After the top part is glued (I waited 8h with glue I used), it is time to drill holes for screws to hold hat on the case.Mark halls using the hat.
Cutting panel
- Using hat frame, mark and cut the panel (steel is 1mm thick).
- Smooth sharp steel edges
- Test hat holes matching panel holes
- Test fan can be inserted in hat from inside of case
Assembly
Now, you need screws and nuts 3mm x4 and 2 washers to attach hat to case
Assembly (next)
After srewing hat to case:
- Insert dustfilter (optional)
- Insert fan
- Put dust filter on top of hat (optional)
- Screw or use rubber holders to attach fan and dust filter to hat.
- Insert motherboard
- done!
1-piece printed part
printed with supports
1-piece variant, printed with supports
How I Designed This
Category: Computer