Asrock Deskmini 120 mm fan Hat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling.
Attention: Necessity of irreversible case modification.
Fan compatibility tested:
- Noctua NF-A12x25 - compatible
- Noctua NF-A12x15 -incompatible (larger plastic shell compared to 25mm thick fan).
Furniture:
screws and nuts 3mm x4
2 washers
Print Settings
Rafts:
Yes
Supports:
No
Infill:
70%
Filament:
Basicfil PLAblack
Notes:
If you want to print in one piece, supports are required.
Both, 2-pieces and one piece models are included.
Post-Printing
Inf you printed in 2-pieces, you will need to glue together the parts.
Top part
Top part, side view
Gluing
To glue together, I used painter tape to prevent exec of glue sticking to frame around.
Preparing bottom
glued part with fan inserted afterwards to test
Case mod
Attention: Irreversible case modification.
After the top part is glued (I waited 8h with glue I used), it is time to drill holes for screws to hold hat on the case.Mark halls using the hat.
Cutting panel
- Using hat frame, mark and cut the panel (steel is 1mm thick).
- Smooth sharp steel edges
- Test hat holes matching panel holes
- Test fan can be inserted in hat from inside of case
Assembly
Now, you need screws and nuts 3mm x4 and 2 washers to attach hat to case
Assembly (next)
After srewing hat to case:
- Insert dustfilter (optional)
- Insert fan
- Put dust filter on top of hat (optional)
- Screw or use rubber holders to attach fan and dust filter to hat.
- Insert motherboard
- done!
1-piece printed part
printed with supports
1-piece variant, printed with supports
How I Designed This
Category: Computer