Waveshare - 4.3 inch DSI LCD Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for a Waveshare - 4.3 inch DSI Touchscreen It has a tight fit, requires decent bridging capabilities of your…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 209
- Wydruki
- 0
- Wyświetlenia
- 1548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A stand for a Waveshare - 4.3 inch DSI Touchscreen
It has a tight fit, requires decent bridging capabilities of your printer and should not be printed above 0.2 layer hight due to the overhangs.
Edit: I'm not really proud of the back/cover, especially not with the mounting, but after a comment I uploaded what I'm using so far. Never was a priority to further improve ;)
Uploaded the main part "PiScreenCase_Waveshare-4.3DSILCD_vBack v11" which only has an additional hole for the ugly mounting of the back cover with a single screw ;)
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
~0.1-0.2
Infill:
up to you, I used 45%
Notes:
- Support from build plate
Category: Electronics