1 / 14
GV Tyre Truer MKII for slot cars 1:32 scale — zdjęcie 1
1 / 14

GV Tyre Truer MKII for slot cars 1:32 scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An improved version of my previous Tyre Truer. The major revision is in the swing arm eliminating the cantilever tyre.…

Ocena
0 / 5
Polubienia
10
Pobrania
84
Wydruki
0
Wyświetlenia
699
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

An improved version of my previous Tyre Truer.

The major revision is in the swing arm eliminating the cantilever tyre.

Beefed-up the pulleys wheels and designed in one piece construction for the base mainly to to avoid possible misalignments.

Print Settings

Printer:

K8400

Rafts:

Doesn't Matter

Supports:

Doesn't Matter


Notes:

Constructional notes:
The tyre shaft is 80 mm long, OD 3/32" with 3 or 4 bronze bearings (one side flange only). The sanding wheel is a market component with shaft OD 6 mm and sanding wheel OD 25 mm. The register screw is a regular M3, 40 mm long with the head turned down to a hair less than 4 mm. The stop screw is a 25 mm long M3.

The motor has an OD of 28 mm from the scrap box. OD motor shaft 2 mm (here you might need to adapt to what you have at hand.

Motor pulley is pressed in the shaft (mine is from brass). It is recommended to have a set of reamers to ensure precise holes and a set of threading taps M3-M5. You need around 30 mm length of precise 5 mm rod for the pivoting of the swing arm.

For the pulleys use o-rings of suitable length.

Have fun and happy slot car races!

Category: Machine Tools

Tagi