1 / 14
GV Tyre Truer MKII for slot cars 1:32 scale — image 1
1 / 14

GV Tyre Truer MKII for slot cars 1:32 scale

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An improved version of my previous Tyre Truer. The major revision is in the swing arm eliminating the cantilever tyre.…

Rating
0 / 5
Likes
10
Downloads
84
Makes
0
Views
699
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

An improved version of my previous Tyre Truer.

The major revision is in the swing arm eliminating the cantilever tyre.

Beefed-up the pulleys wheels and designed in one piece construction for the base mainly to to avoid possible misalignments.

Print Settings

Printer:

K8400

Rafts:

Doesn't Matter

Supports:

Doesn't Matter


Notes:

Constructional notes:
The tyre shaft is 80 mm long, OD 3/32" with 3 or 4 bronze bearings (one side flange only). The sanding wheel is a market component with shaft OD 6 mm and sanding wheel OD 25 mm. The register screw is a regular M3, 40 mm long with the head turned down to a hair less than 4 mm. The stop screw is a 25 mm long M3.

The motor has an OD of 28 mm from the scrap box. OD motor shaft 2 mm (here you might need to adapt to what you have at hand.

Motor pulley is pressed in the shaft (mine is from brass). It is recommended to have a set of reamers to ensure precise holes and a set of threading taps M3-M5. You need around 30 mm length of precise 5 mm rod for the pivoting of the swing arm.

For the pulleys use o-rings of suitable length.

Have fun and happy slot car races!

Category: Machine Tools

Tags