1 / 23
GV Tyre Truer MKI for slot cars 1:32 scale — zdjęcie 1
1 / 23

GV Tyre Truer MKI for slot cars 1:32 scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tyre truer for slot cars in scale 1:32 and 1:24 Befeed-up some of the components.

Ocena
0 / 5
Polubienia
8
Pobrania
70
Wydruki
0
Wyświetlenia
815
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Tyre truer for slot cars in scale 1:32 and 1:24

Befeed-up some of the components.

Print Settings

Printer:

Velleman Vertex K8400


Notes:

The tyre shaft is the standard 3/32" with the bronze bearings (one side flange only).
The sanding wheel is a market component with shaft OD 6 mm and sanding wheel OD approx 28 mm.

The register screw is a regular M3, 40 mm long. I turned the head down to a hair less than 4 mm.

The motor design was originated from what I had in hand with a OD 28 mm motor from an unknown toy car. OD motor shaft 2 mm. Motor pulley is pressed in and should be best made in metal material (mine is from brass).

I used a set of reamers to ensure precise holes and threading taps to take care of dressing the threads where necessary.

You need around 30 mm length of precise 5 mm rod for the pivoting of the swing arm. I tried initially an M5 screw but it adds unnecessary small clearance.

To fix the vertical bearing and motor support you need nr. 3 M4 screws 12mm long with V's heads.

I used a NSR rim as the tyre shaft pulley for better strength. The sanding wheel bushing should be from bronze bearing grade although it works fine with the printed one but I haven't tested it for long.

Custom Section

Category: Machine Tools

Tagi