GV Tyre Truer MKI for slot cars 1:32 scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tyre truer for slot cars in scale 1:32 and 1:24 Befeed-up some of the components.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 0
- Views
- 815
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Tyre truer for slot cars in scale 1:32 and 1:24
Befeed-up some of the components.
Print Settings
Printer:
Velleman Vertex K8400
Notes:
The tyre shaft is the standard 3/32" with the bronze bearings (one side flange only).
The sanding wheel is a market component with shaft OD 6 mm and sanding wheel OD approx 28 mm.
The register screw is a regular M3, 40 mm long. I turned the head down to a hair less than 4 mm.
The motor design was originated from what I had in hand with a OD 28 mm motor from an unknown toy car. OD motor shaft 2 mm. Motor pulley is pressed in and should be best made in metal material (mine is from brass).
I used a set of reamers to ensure precise holes and threading taps to take care of dressing the threads where necessary.
You need around 30 mm length of precise 5 mm rod for the pivoting of the swing arm. I tried initially an M5 screw but it adds unnecessary small clearance.
To fix the vertical bearing and motor support you need nr. 3 M4 screws 12mm long with V's heads.
I used a NSR rim as the tyre shaft pulley for better strength. The sanding wheel bushing should be from bronze bearing grade although it works fine with the printed one but I haven't tested it for long.
Custom Section
Category: Machine Tools