Anycubic Vyper EBB36 Bracket for Stealthburner W/Linear Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an EBB36 Bracket and shroud designed for the Anycubic Vyper outfitted with linear rails and a Stealthburner.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 965
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Since I am an absolute nutcase, I wanted to outfit my Anycubic Vyper to use a Stealthburner, Linear Rails, and of course, CAN. But after installing these parts, I realized that my print head wouldn't fit properly with the ebb36 installed. So, I remixed several designs here, to Frankenstein my own bracket.
This bracket fits behind an LDO Nema14 stepper motor mounted to a Clockwork 2 extruder. It also has a shroud with a built-in PG7 mount for strain relief. When installed, this setup has plenty of clearance for the top mount MGN12H carriage, and enough space behind the print head to move across the X-gantry without issue.
If you're using the EBB36, I'd recommend de-soldering the heater wire PCB terminal and flipping it around for a bit more clearance.
This bracket is an amalgamation based on the following designs:
https://www.printables.com/model/263868-bigtreetech-ebb36-stealthburner-mount-with-gland
https://www.printables.com/model/345860-ebb36-mount-for-stealthburnercw2-remix
Print Settings:
- PETG (Though PLA and ABS/ASA will work)
- No Supports
- 15-40% infill
- 0.2mm Layer Height
- Printed on the Anycubic Vyper