GoPro Action Camera Mount to 1/4 20 inch Tripod screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fairly simple adapter from 1/4 20 screw to GoPro/Action Cam mount It's already threaded, no need to tap it. Print and…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 769
- Wydruki
- 6
- Wyświetlenia
- 2370
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Fairly simple adapter from 1/4 20 screw to GoPro/Action Cam mount
It's already threaded, no need to tap it. Print and screw in
For best results print at 0.2mm with 100% infill
There is a cutout for a standard M5 nut
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100
Filament:
Any PLA/ABS/PETG/Nylon etc.
Notes:
Print with 100% infill laying flat for best results.
If you print under 0.2mm resolution (a.k.a 0.3+) you might find it difficult to screw it in.
Category: Camera
