1 / 11
Brumisateur pour ventilateur - Fogger for fan — zdjęcie 1
1 / 11

Brumisateur pour ventilateur - Fogger for fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

L'été est plutôt caniculaire maintenant, un ventilateur s'impose.

Ocena
0 / 5
Polubienia
8
Pobrania
33
Wydruki
0
Wyświetlenia
1007
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

FR

L'été est plutôt caniculaire cette année, un ventilateur s'impose. J'en ai un utilisé à l'extérieur et j'ai décidé de lui adjoindre une fonction brumisateur. Je me suis servi d'un kit vendu sur Amazon et une minuterie permet de déclencher la brumisation pendant 10 secondes toutes les minutes, de façon à sentir la brume et ne pas être mouillé.

Ce kit de brumisation est de bonne qualité et ne présente pas de fuites d'eau.

Kit brumisateur : https://amzn.to/2K3A6Zt

Le temporisateur peut être fixé sur un tuyau d'arrosage, le départ vers le kit se visse directement en sortie de celui-ci. L'arrivée du tuyau d'arrosage nécessite un embout supplémentaire à visser dessus.

Minuterie : https://amzn.to/2Y4nEO5 (Celle-ci permet de minuter 10 sec de brumisation par minute par exemple)

Les pulvérisateurs sont fixés sur la couronne, on peut le faire avec des vis M3x30 ou des colliers à serrage rapide. L'arrivée d'eau est également fixée sur la même pièce. L'ensemble est à fixer sur la grille du ventilateur à l'aide de colliers à serrage rapide.

Il est tout à fait possible de faire osciller le ventilateur pendant la brumisation.

Un fixateur de pulvérisateur permettra de fixer le système de brumisation aligné sur un tasseau en bois, et que vous pourrez suspendre en l'air, si vous préférez.

Add-on : Le support du minuteur est prévu pour un pied de 25mm de diamètre. Insérez le minuteur par le coté fin du support, les clips autour des tuyaux viendront bloquer le minuteur par un mouvement de rotation. Bien le positionner et l'insérer ensuite sur le mat du ventilateur.

Un fichier avec 3 buses au lieu de 4 à été ajouté. Le kit brumisation permet de faire un ventilateur avec 4 buses et un avec 3 buses, avec les accessoires fournis.

ENG

Summer is rather scorching this year, a fan is needed. I have one used outside and I decided to add a fogger function. I used a kit sold on Amazon and a timer can trigger the fogging for 10 seconds every minute, so as to feel the mist and not get wet.

This misting kit is of good quality and does not show any water leaks.

(The links are for France, but allow you to find the equivalent in your country)

Fogger kit: https://amzn.to/2K3A6Zt

The timer can be attached to a garden hose, the start to the kit is screwed directly out of it. The arrival of the garden hose requires an additional tip to screw on.

Timer: https://amzn.to/2Y4nEO5 (This one allows you to enter 10 sec of mist per minute for example)

Sprayers are attached to the crown, it can be done with M3x30 screws or quick clamps. The water supply is also attached to the same part. The assembly is to be attached to the fan grille using quick clamps.

It is quite possible to oscillate the fan during misting.

A spray fixator will fix the misting system aligned on a wooden batten, which you can hang in the air, if you prefer.

Add-on : The timer support is provided for a 25mm diameter foot. Insert the timer by the small side of the support, the clips around the pipes will come to block the timer by a rotational movement. Position it well and insert it on the fan mat.

A file with 3 nozzles instead of 4 has been added. The misting kit allows to make a fan with 4 nozzles and one with 3 nozzles, with the accessories provided.

Print Settings

Printer Brand:

Anycubic

Printer: 

All-metal Mega

Rafts:

No

Supports: 

No

Resolution:

.020

Infill: 

30

Tagi