Bottle Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bottle holder for a 1 inch thick desk approx. 25mm.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hook that slides on your desk to hold your bottle by the handle for bottles like the LTT Store bottle or the Cirkul bottles.
It fits 1 inch or 25mm thick desktops. It works best if you put some foam tape on the top finger between the printed part and the desk to prevent scratches. It does work without the foam tape, but I don't recommend that.
It should print under an hour on the i3mk3 or the mini.
It was tested with a cirkul bottle cap on a filled 40oz ltt store bottle. The dip in the front of the part allows you to leave the flip top from the cirkul top tucked under the handle while hanging.