E3D Dual Extruder mount for Hypercube Evolution with 18mm capacitive sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to adapt a dual extruder on the Hypercube Evolution. I also use a 18mm capacitive sensor. I try to made…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made this to adapt a dual extruder on the Hypercube Evolution.
I also use a 18mm capacitive sensor.
I try to made this as small as possible, to keep a good autobed leveling and to keep the maximum travel distance
You can still use the fan and duct fan to cool printing.
As my Hypercube is not build yet, I haven't try it for the moment
Let me know If you have any improvement or if you see something wrong! :)
Print Settings
Printer:
Zonestar
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 to 0.2
Infill:
40%
Category: 3D Printer Parts