E3D Dual Extruder mount for Hypercube Evolution with 18mm capacitive sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this to adapt a dual extruder on the Hypercube Evolution. I also use a 18mm capacitive sensor. I try to made…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I made this to adapt a dual extruder on the Hypercube Evolution.
I also use a 18mm capacitive sensor.
I try to made this as small as possible, to keep a good autobed leveling and to keep the maximum travel distance
You can still use the fan and duct fan to cool printing.
As my Hypercube is not build yet, I haven't try it for the moment
Let me know If you have any improvement or if you see something wrong! :)
Print Settings
Printer:
Zonestar
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 to 0.2
Infill:
40%
Category: 3D Printer Parts