1 / 7
Dual Extruder Chimera Head hot swap for Hypercube NGEN — zdjęcie 1
1 / 7

Dual Extruder Chimera Head hot swap for Hypercube NGEN

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive. This will allow to use a dual…

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
428
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive.

This will allow to use a dual extruder chimera on the printer, allowing to print dual color/dual material.

Design have been tested already, but this is still a draft version. Next improvement will be to change the design to add a fan for the part, and maybe a better cooling on the head itself.

Only use ABS or any similar material with a glass transition >= 100deg. as the cooling part can still get really hot when using both extruder in extreme condition (printing ABS with both head at 250deg...). I recorded ~60-70deg on the cooling part

Offset :

T0 ; X=0.00 Y=0.00 Z=0.00

T1 ; X=18.00 Y=0.00 Z=0.00

BL Touch ; X=9.00 Y=72.5 Z=depend on your machine

To be adjusted on your own machine.

If people are interested, I will also write a small guide on how to reconfigure Simplify 3D --> Octoprint --> Klipper to allow the tool changement.

Enjoy!

Print Settings

Printer:

Hypercube EVO NGEN

Rafts:

Yes

Supports:

Yes

Resolution:

0.2

Infill:

40%

Filament:

- ABS

Category: 3D Printer Parts

Tagi