Dual Extruder Chimera Head hot swap for Hypercube NGEN
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive. This will allow to use a dual…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive.
This will allow to use a dual extruder chimera on the printer, allowing to print dual color/dual material.
Design have been tested already, but this is still a draft version. Next improvement will be to change the design to add a fan for the part, and maybe a better cooling on the head itself.
Only use ABS or any similar material with a glass transition >= 100deg. as the cooling part can still get really hot when using both extruder in extreme condition (printing ABS with both head at 250deg...). I recorded ~60-70deg on the cooling part
Offset :
T0 ; X=0.00 Y=0.00 Z=0.00
T1 ; X=18.00 Y=0.00 Z=0.00
BL Touch ; X=9.00 Y=72.5 Z=depend on your machine
To be adjusted on your own machine.
If people are interested, I will also write a small guide on how to reconfigure Simplify 3D --> Octoprint --> Klipper to allow the tool changement.
Enjoy!
Print Settings
Printer:
Hypercube EVO NGEN
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
40%
Filament:
- ABSCategory: 3D Printer Parts