Sleeve for a CS Mount 5-50mm Lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is nice looking Sleeve for a 5-50mm CS Mount Lens.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You own a 2BitToy Camera+? You use a 5-50 F1.6 ⅓ CS mounted Lens and you want a nice looking Lens which fits better to the Camera+?
Here is what you looking for. This is nice looking Sleeve for your Lens.
Assembling:
The Iris Ring should fit tight.
Focus And Zoom should fit over the bottom and and parts. maybe it needs some sanding! On the original Focus and Zoom rings, add a piece of isolation Tape to increase the thickness off the Rings, because the rings are smaller as the case case himself.
Print Settings:
PLA, 0.2mm, 25% Infill, No Support