1 / 17
Sleeve for a CS Mount 5-50mm Lens
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is nice looking Sleeve for a 5-50mm CS Mount Lens.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You own a 2BitToy Camera+? You use a 5-50 F1.6 ⅓ CS mounted Lens and you want a nice looking Lens which fits better to the Camera+?
Here is what you looking for. This is nice looking Sleeve for your Lens.
Assembling:
The Iris Ring should fit tight.
Focus And Zoom should fit over the bottom and and parts. maybe it needs some sanding! On the original Focus and Zoom rings, add a piece of isolation Tape to increase the thickness off the Rings, because the rings are smaller as the case case himself.
Print Settings:
PLA, 0.2mm, 25% Infill, No Support