Pirahna 1978 Movie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is to be used as a magnet or portrait.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 350
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
Hi guys, this is my fifth design design that I upload to Printables and I want to share it with all of you. The printing in normal PLA with the following parameters in the slicer of your choice (but you can use the parameters that you use the most and work best for you)
Pirahna 1978
Layer High: 0.28mm
Infill: 10%
Print size: 70mm (7cm high)
Support Type: Tree
Printing time: 5 hours and 39min
Post-processing: Sanded in some parts and apply primer before painting
You can follow me on instagram,
https://www.instagram.com/gioteya_designs/
https://www.facebook.com/gioteyadesigns
to find out what I designs I am currently working on
If you want to support me, you can find more models in my account:
https://cults3d.com/es/usuarios/GioteyaDesigns/creaci%C3%B3n
https://www.cgtrader.com/gioteyadesigns
I hope you enjoy and Happy Printing :)