Drawer Battery Box AA & AAA + storage for empty batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery Box that fits into a drawer. Box + Battery max height 4.4cm. Space for empty batteries / other stuff included.
- Ocena
- 5 / 5
- Polubienia
- 117
- Pobrania
- 760
- Wydruki
- 9
- Wyświetlenia
- 3085
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
!! ATTENTION
You can't scale the model as the battery size needs to be kept.
I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures.
For the infill I did 8% Grid. You can go up to 10 - 15% if you like.
Print duration would go up to around 6h45min.
######
Hello again.
As I wanted to store my batteries in my table drawer I needed to create a model that would fit with a max height of 4,9cm. So I had to put the AA in a 45° angle. I reduced the amount of batteries to 20 x AA and 24 x AAA + space for 10 AA empty ones.
I also wanted to safe some PLA as I didn't need the area around my AAA to be as high as for my AA (like in the original model). And I didn't need the top lid as it was in the drawer anyways.
FACTS:
Size of the box is 13.3cm x 15.3cm x 2cm
102g of PLA
I used a 0.4n with a 0.24mm LH and 100 PS.
Took me around 5h30min to print it.
I will share the .gcode and .slt if you want to change the model as you cannot scale it.
Please share your models and let me know your best settings :)