Inland cardboard spool adapter for Bambu Lab reusable spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to fit a regular cardboard Inland spool after tearing the sides off. Use one with your Bambu Lab reusable spool.
- Ocena
- 4 / 5
- Polubienia
- 28
- Pobrania
- 273
- Wydruki
- 1
- Wyświetlenia
- 2956
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The original make was great, but didn't fit the cardboard Inland spools (which are slightly smaller than the spooless ones). I have quite a few of the cardboard ones and wanted an easy way to quickly convert them to a Bambu Lab reusable spool since the AMS doesn't work well with cardboard spools.
All you need to print is one adapter per spool. It fits nice and snug once it's on.
I used masking tape and wrapped it around the Inland filament on the cardboard spool. That keeps everything from moving when you tear the cardboard spool's sides off.
Then I tore one of the sides off the Inland cardboard spool, being careful to not accidentally unravel the filament.
After that, I attached the printed adapter and the Bambu Lab reusable spool side that has the plastic nub.
And finally, I tore off the other cardboard side of the Inland spool and attach the other half of the Bambu Lab reusable spool, rotating it until it clicks in place.
Worked like a dream and is snug enough not to rotate on itself.
Hope this helps some people!