1 / 2
Aqara TVOC Sensor bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
I wanted to “hang” Aqara TVOC sensor in the cabinet. Found an excellent bracket by DutchDeveloper and slightly remixed it. Aqara sensor is easily accessible and can be clicked out. Also, inner sensors are not covered.
The holder can be stuck to the cabinet with double-sided tape. I used heavy-duty tape which is approx 1 mm in height. The top of the holder covers the tape so there is no gap between the holder and cabinet.
Can be printed from PETG or PLA (tested with white PLA Prusament).
- Print settings: 0.20mm QUALITY
- 5 perimeters so the front side is quite smooth
- Without supports
- Print front side oriented on the bed