1 / 7
SSP1 (Hi-Capa) Bottom Rail to Top Rail Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile top rail for the Novritch SSP1. A M3-35mm Phillips or Allankey bold and a M3 Nut is used to fix the…
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 330
- Wydruki
- 0
- Wyświetlenia
- 1860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (1)Kolekcje (62)Powiązane
A low profile top rail for the Novritch SSP1.
A M3-35mm Phillips or Allankey bold and a M3 Nut is used to fix the botom rail in place.
(It schuld hold on ti's own)
Print Settings
Layer Height = 0,2mm
Infill = 50% (it will work with less, just make sure it dos'nt break form Recoil)
Support = on
Support Overhang = 20°
