1 / 2
CR6-SE Bondtech LGX and 40mm part fan — zdjęcie 1
1 / 2

CR6-SE Bondtech LGX and 40mm part fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Design mix of Bondtech LGX mounting part and fan duct support. Improved fan duct can be found at…

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
264
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Design mix of Bondtech LGX mounting part and fan duct support.

Improved fan duct can be found at https://www.thingiverse.com/thing:4763949/files

I used fans bought from https://arcto3d.se/guides/installing-our-silent-fan-kit-on-creality-cr-6-se/

Will upload photos once I have my printer upgrades finished.

Print Settings

Printer Brand:

Creality

Printer:

CR-X

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

200

Infill:

38

Filament: eSUN PLA+ Any


Notes:

Might need some support but my CR6-SE managed fine.

I used 3 perimeters but use your own judgement based on the fan you have.

Post-Printing

Sanding

I just did a very small of light sanding and then did some tests to check on layer adhesion.

How I Designed This

Design

I took the Bondtech STEP files and added a simple addition to support the fan based of the one I linked.

Category: 3D Printer Parts

Tagi