N20 Motor to 9G Servo adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the times when you have lots of N20 gear motors and need a continuous rotation servo that uses a 9g mount.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I recently had a need for a bunch of 9g continuous rotation servos and found that I had a surplus of N20 gear motors. I designed this 2 part case to mount the N20 Motor on a 9G servo mount in a project. It may be of use to others. Please excuse the poor print as this was old filament.
I added a threaded insert (3mm) in the bottom of the top part so the two parts can be screwed together once the motor is inside.
It's a little wider and taller than a 9g but should fit into most 9g servo mounts